Phoenix Contact · Connection Cable
1411044 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
M12 knurl |
| Rated speed |
10 Gbps |
| Mechanical |
| Weight |
43.2 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1411044 (this page) |
up to 4 A |
| 1411043 |
up to 4 A |
| 1411366 |
up to 4 A |
| 1411868 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1411044 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1411044
Phoenix Contact 1411044 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1411044; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated speed: 10 Gbps — Verify it in the project documentation before confirming the order.
- Rated current Ie: up to 4 A — Check this value against the nameplate of the installed unit before ordering.
- Weight: 43.2 g — Match it to the existing panel and upstream protection.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1411044
Q.Where can I find the rated current Ie data for 1411044?
It is listed in the specification table for Phoenix Contact 1411044 as up to 4 A. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1411044, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 1411044. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated torque for catalog number 1411044?
For 1411044, rated torque is given as M12 knurl. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1411044 replace the unit currently installed in my panel?
Compare catalog number 1411044 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1411044?
Send the full catalog number 1411044, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1411044.