Phoenix Contact · Connection Cable
1411868 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Rated operational voltage 72 V (DC); Breaking capacity Icu/Ics CAT5 (IEC 11801:2002). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage72 V (DC)
-
Breaking capacity Icu/IcsCAT5 (IEC 11801:2002)
-
Enclosure ratingIP67 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
72 V (DC) |
| Breaking capacity Icu/Ics |
CAT5 (IEC 11801:2002) |
| Rated speed |
100 Mbps |
| I/O and communication |
| Flame detection |
according to UL 1685 (CSA FT 4) |
| Mechanical |
| Weight |
67 kg/km |
| Terminal wire size |
Tin-plated Cu litz wires |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
|
1411868 (this page) |
— |
| 1411043 |
— |
| 1411044 |
— |
| 1411366 |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1411868 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 72 V (DC) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1411868
Phoenix Contact 1411868 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1411868; verify the catalog number against your bill of materials before requesting a quotation.
- Weight: 67 kg/km — Match it to the existing panel and upstream protection.
- Rated speed: 100 Mbps — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Flame detection: according to UL 1685 (CSA FT 4) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1411868
Q.Where can I find the rated speed data for 1411868?
It is listed in the specification table for Phoenix Contact 1411868 as 100 Mbps. Confirm this figure against the unit currently in the panel.
Q.For 1411868, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 72 V (DC) for Phoenix Contact 1411868. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under breaking capacity Icu/Ics for catalog number 1411868?
For 1411868, breaking capacity Icu/Ics is given as CAT5 (IEC 11801:2002). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1411868 replace the unit currently installed in my panel?
Compare catalog number 1411868 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1411868?
Send the full catalog number 1411868, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1411868.