Phoenix Contact 1418079 Connection Cable

SKU: 1418079
Regular price $228.07
In stock (51 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

1418079 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Breaking capacity Icu/Ics CAT5 (IEC 11801:2002); Enclosure rating IP67 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Breaking capacity Icu/IcsCAT5 (IEC 11801:2002)
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)

Specifications

Electrical
Rated current Ie up to 4 A
Breaking capacity Icu/Ics CAT5 (IEC 11801:2002)
Rated speed 100 Mbps
I/O and communication
Bus interface Ethernet
Flame detection according to IEC 60332-1-2
Mechanical
Weight 22.22 g
Terminal wire size 2x2xAWG26/7, SF/UTP
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Mounting
1418079 (this page) —
1411043 —
1411044 —
1411366 —

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1418079 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1418079

Phoenix Contact 1418079 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1418079; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
  • Terminal wire size: 2x2xAWG26/7, SF/UTP — Confirm the revision of the installed unit before a like-for-like replacement.
  • Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
  • Weight: 22.22 g — Verify it in the project documentation before confirming the order.

Cross-check the ratings above with the installed device before confirming the order.

Common questions about 1418079

Q.Where can I find the bus interface data for 1418079?

It is listed in the specification table for Phoenix Contact 1418079 as Ethernet. Compare it with the nameplate of the installed unit before ordering.

Q.For 1418079, what does the specification table state about breaking capacity Icu/Ics?

The specification table lists breaking capacity Icu/Ics = CAT5 (IEC 11801:2002) for Phoenix Contact 1418079. Confirm this figure against the unit currently in the panel.

Q.Which value is published under terminal wire size for catalog number 1418079?

For 1418079, terminal wire size is given as 2x2xAWG26/7, SF/UTP. Use the value as the reference when sourcing a current-production equivalent.

Q.How do I confirm compatibility of 1418079 before ordering?

Match the catalog number 1418079 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.Can the 1418079 replace the unit currently installed in my panel?

Compare catalog number 1418079 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!