Phoenix Contact · Cable Entry System
1411074 is a Phoenix Contact industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
2 Nm ... 4 Nm (Locking screw) |
| Mechanical |
| Weight |
270.3 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Cutout dimensions |
35 mm |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Cable Entry System specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Cable Entry System variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1411074 (this page) |
up to 4 A |
DIN rail / panel |
| 1411901 |
up to 4 A |
DIN rail / panel |
| 1424711 |
up to 4 A |
DIN rail / panel |
| 1424712 |
up to 4 A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1411074 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1411074
Phoenix Contact 1411074 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1411074; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Cutout dimensions: 35 mm — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1411074
Q.For 1411074, what does the specification table state about weight?
The specification table lists weight = 270.3 g for Phoenix Contact 1411074. Confirm this figure against the unit currently in the panel.
Q.Which value is published under mounting for catalog number 1411074?
For 1411074, mounting is given as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1411074, which rated torque entry should be checked?
The rated torque entry quoted above is 2 Nm ... 4 Nm (Locking screw). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1411074 before ordering?
Match the catalog number 1411074 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1411074 replace the unit currently installed in my panel?
Compare catalog number 1411074 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.