Phoenix Contact · Cable Entry System
1424711 is a Phoenix Contact industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated speed |
12 Mbps |
| Mechanical |
| Weight |
48 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Cable Entry System specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Cable Entry System variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1424711 (this page) |
up to 4 A |
DIN rail / panel |
| 1424712 |
up to 4 A |
DIN rail / panel |
| 1411074 |
up to 4 A |
DIN rail / panel |
| 1411901 |
up to 4 A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1424711 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1424711
Phoenix Contact 1424711 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1424711; record the nameplate data of the unit being replaced before selecting an equivalent.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1424711
Q.Before ordering 1424711, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for 1424711?
It is listed in the specification table for Phoenix Contact 1424711 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 1424711, what does the specification table state about weight?
The specification table lists weight = 48 g for Phoenix Contact 1424711. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1424711 before ordering?
Match the catalog number 1424711 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1424711 replace the unit currently installed in my panel?
Compare catalog number 1424711 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.