Phoenix Contact · Connection Cable
0920384 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 400 V (In the event of a defective fuse, the downstream circuit is not disconnected.); Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage400 V (In the event of a defective fuse, the downstream circuit is not disconnected.)
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) |
| Mechanical |
| Weight |
10.209 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Rated current Ie |
|
0920384 (this page) |
400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) |
up to 4 A |
| 0920326 |
400 V |
up to 4 A |
| 0920397 |
400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) |
up to 4 A |
| 0920287 |
400 V |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0920384 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0920384
Phoenix Contact 0920384 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0920384; verify the catalog number against your bill of materials before requesting a quotation.
- Rated current Ie: up to 4 A — Check this value against the nameplate of the installed unit before ordering.
- Rated operational voltage: 400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) — Match it to the existing panel and upstream protection.
- Weight: 10.209 g — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP67 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 0920384
Q.Before ordering 0920384, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for 0920384?
It is listed in the specification table for Phoenix Contact 0920384 as IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 0920384, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) for Phoenix Contact 0920384. Confirm this figure against the unit currently in the panel.
Q.Can the 0920384 replace the unit currently installed in my panel?
Compare catalog number 0920384 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 0920384?
Send the full catalog number 0920384, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0920384.