Phoenix Contact · Connection Cable
0920287 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 400 V; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage400 V
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
400 V |
| Mechanical |
| Weight |
9.488 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Rated current Ie |
|
0920287 (this page) |
400 V |
up to 4 A |
| 0920326 |
400 V |
up to 4 A |
| 0920384 |
400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) |
up to 4 A |
| 0920397 |
400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0920287 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 400 V — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0920287
Phoenix Contact 0920287 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0920287; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 9.488 g — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Humidity: 30 % ... 70 % — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 0920287
Q.For 0920287, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 400 V for Phoenix Contact 0920287. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 0920287?
For 0920287, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 0920287, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 0920287 replace the unit currently installed in my panel?
Compare catalog number 0920287 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 0920287?
Send the full catalog number 0920287, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0920287.