Phoenix Contact · circuit breaker
0916536 is a Phoenix Contact circuit breaker with Tripping characteristic B / C / D (IEC 60947-2); Number of poles 1 / 2 / 3 / 4 (IEC 60947-2); Rated operational voltage <= 440 V AC. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristicB / C / D (IEC 60947-2)
-
Number of poles1 / 2 / 3 / 4 (IEC 60947-2)
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/Ics6 kA / 10 kA (IEC 60947-2)
Specifications
| Electrical |
| Rated operational voltage |
<= 440 V AC |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (IEC 60947-2) |
| Tripping characteristic |
B / C / D (IEC 60947-2) |
| Number of poles |
1 / 2 / 3 / 4 (IEC 60947-2) |
| Mechanical |
| Weight |
75.92 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact circuit breaker variants |
| Catalog number |
Rated operational voltage |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
0916536 (this page) |
<= 440 V AC |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 0916605 |
240 V AC (50/60 Hz) |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 0911034 |
<= 440 V AC |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 0914141 |
65 V DC |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0916536 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the <= 440 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0916536
Phoenix Contact 0916536 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0916536; record the nameplate data of the unit being replaced before selecting an equivalent.
- Tripping characteristic: B / C / D (IEC 60947-2) — Verify it in the project documentation before confirming the order.
- Rated operational voltage: <= 440 V AC — Check this value against the nameplate of the installed unit before ordering.
- Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
- Number of poles: 1 / 2 / 3 / 4 (IEC 60947-2) — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 0916536
Q.Before ordering 0916536, which rated impulse withstand Uimp entry should be checked?
The rated impulse withstand Uimp entry quoted above is 4 kV (IEC 60947-2). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the weight data for 0916536?
It is listed in the specification table for Phoenix Contact 0916536 as 75.92 g. Confirm this figure against the unit currently in the panel.
Q.For 0916536, what does the specification table state about rated insulation voltage Ui?
The specification table lists rated insulation voltage Ui = 440 V (IEC 60947-2) for Phoenix Contact 0916536. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 0916536 replace the unit currently installed in my panel?
Compare catalog number 0916536 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 0916536?
Send the full catalog number 0916536, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0916536.