Phoenix Contact · sensor
0903028 is a Phoenix Contact sensor with Sensing distance Sn 7430000 h (at 25 °C with 80 % load); Enclosure rating IP20 (IEC 60529); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in conveyor object detection, machine guarding, position feedback where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Sensing distance Sn7430000 h (at 25 °C with 80 % load)
-
Enclosure ratingIP20 (IEC 60529)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Rated torque |
... 1.2 Nm |
| I/O and communication |
| Sensing distance Sn |
7430000 h (at 25 °C with 80 % load) |
| Mechanical |
| Weight |
69 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 16 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact sensor variants |
| Catalog number |
Sensing distance Sn |
|
0903028 (this page) |
7430000 h (at 25 °C with 80 % load) |
| 0903023 |
7430000 h (at 25 °C with 80 % load) |
| 0903025 |
7430000 h (at 25 °C with 80 % load) |
| 0903026 |
7430000 h (at 25 °C with 80 % load) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0903028 is the device-level element in a Phoenix Contact sensor installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in conveyor object detection, machine guarding, position feedback, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0903028
Phoenix Contact 0903028 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0903028; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Number of poles: 1 / 2 / 3 / 4 (EN 60934 / UL 1077) — Check this value against the nameplate of the installed unit before ordering.
- Weight: 69 g — Match it to the existing panel and upstream protection.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0903028
Q.Where can I find the sensing distance Sn data for 0903028?
It is listed in the specification table for Phoenix Contact 0903028 as 7430000 h (at 25 °C with 80 % load). Confirm this figure against the unit currently in the panel.
Q.For 0903028, what does the specification table state about weight?
The specification table lists weight = 69 g for Phoenix Contact 0903028. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under operating temperature for catalog number 0903028?
For 0903028, operating temperature is given as -25...+60 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 0903028 before ordering?
Match the catalog number 0903028 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 0903028?
Send the full catalog number 0903028, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0903028.