Phoenix Contact · sensor
0903026 is a Phoenix Contact sensor with Sensing distance Sn 7430000 h (at 25 °C with 80 % load); Enclosure rating IP20 (IEC 60529); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in conveyor object detection, machine guarding, position feedback where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Sensing distance Sn7430000 h (at 25 °C with 80 % load)
-
Enclosure ratingIP20 (IEC 60529)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Rated torque |
... 1.2 Nm |
| I/O and communication |
| Sensing distance Sn |
7430000 h (at 25 °C with 80 % load) |
| Mechanical |
| Weight |
69.017 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 16 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact sensor variants |
| Catalog number |
Sensing distance Sn |
|
0903026 (this page) |
7430000 h (at 25 °C with 80 % load) |
| 0903023 |
7430000 h (at 25 °C with 80 % load) |
| 0903025 |
7430000 h (at 25 °C with 80 % load) |
| 0903028 |
7430000 h (at 25 °C with 80 % load) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0903026 is the device-level element in a Phoenix Contact sensor installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in conveyor object detection, machine guarding, position feedback, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0903026
Phoenix Contact 0903026 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0903026; record the nameplate data of the unit being replaced before selecting an equivalent.
- Sensing distance Sn: 7430000 h (at 25 °C with 80 % load) — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 69.017 g — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+60 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Rated impulse withstand Uimp: 4 kV (IEC 60947-2) — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 0903026
Q.Which value is published under number of poles for catalog number 0903026?
For 0903026, number of poles is given as 1 / 2 / 3 / 4 (EN 60934 / UL 1077). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 0903026, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the tripping characteristic data for 0903026?
It is listed in the specification table for Phoenix Contact 0903026 as B / C / D (EN 60934 / UL 1077). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 0903026?
Send the full catalog number 0903026, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0903026.
Q.Can the 0903026 replace the unit currently installed in my panel?
Compare catalog number 0903026 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.