Phoenix Contact · Heavy-Duty Connector
1771202 is a Phoenix Contact circuit breaker with Rated current Ie 16 A; Tripping characteristic 7 mm; Rated operational voltage <= 440 V AC. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A
-
Tripping characteristic7 mm
-
Rated operational voltage<= 440 V AC
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
16 A |
| Rated operational voltage |
<= 440 V AC |
| Tripping characteristic |
7 mm |
| Rated torque |
0.5 Nm |
| Mechanical |
| Weight |
83.24 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 2.5 mm² (applies to stranded conductors with ferrules) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Mounting |
|
1771202 (this page) |
DIN rail / panel |
| 1771118 |
DIN rail / panel |
| 1771163 |
DIN rail / panel |
| 1771312 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1771202 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 16 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1771202
Phoenix Contact 1771202 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1771202; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Operating temperature: -25...+60 °C — Match it to the existing panel and upstream protection.
- Tripping characteristic: 7 mm — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1771202
Q.Where can I find the enclosure rating data for 1771202?
It is listed in the specification table for Phoenix Contact 1771202 as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.For 1771202, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+60 °C for Phoenix Contact 1771202. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under certifications for catalog number 1771202?
For 1771202, certifications is given as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1771202 replace the unit currently installed in my panel?
Compare catalog number 1771202 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1771202?
Send the full catalog number 1771202, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1771202.