Phoenix Contact · Heavy-Duty Connector
1771163 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
224.09 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Mounting |
|
1771163 (this page) |
DIN rail / panel |
| 1771118 |
DIN rail / panel |
| 1771202 |
DIN rail / panel |
| 1771312 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1771163 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1771163
Phoenix Contact 1771163 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1771163; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Weight: 224.09 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1771163
Q.Where can I find the enclosure rating data for 1771163?
It is listed in the specification table for Phoenix Contact 1771163 as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.For 1771163, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1771163. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under weight for catalog number 1771163?
For 1771163, weight is given as 224.09 g. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1771163?
Send the full catalog number 1771163, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1771163.
Q.How do I confirm compatibility of 1771163 before ordering?
Match the catalog number 1771163 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.