Phoenix Contact · Network Connector
1607578 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
0.238 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Network Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Connector variants |
| Catalog number |
Mounting |
|
1607578 (this page) |
DIN rail / panel |
| 1607130 |
DIN rail / panel |
| 1607376 |
DIN rail / panel |
| 1653744 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1607578 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1607578
Phoenix Contact 1607578 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1607578; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 0.238 g — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1607578
Q.Where can I find the mounting data for 1607578?
It is listed in the specification table for Phoenix Contact 1607578 as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1607578, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 1607578. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under certifications for catalog number 1607578?
For 1607578, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1607578 replace the unit currently installed in my panel?
Compare catalog number 1607578 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1607578 before ordering?
Match the catalog number 1607578 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.