Phoenix Contact 1507492 Connection Cable

SKU: 1507492
Regular price $451.80
In stock (64 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

1507492 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)
  • CertificationsCE, UL, cULus

Specifications

Electrical
Rated current Ie up to 4 A
I/O and communication
Bus interface CANopen®/DeviceNet™
Flame detection UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1)
Mechanical
Weight 582 g
Terminal wire size 2xAWG24/19+2xAWG22/19
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Rated current Ie
1507492 (this page) up to 4 A
1507201 up to 4 A
1507269 up to 4 A
1507382 up to 4 A

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1507492 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1507492

Phoenix Contact 1507492 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1507492; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

  • Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
  • Bus interface: CANopen®/DeviceNet™ — Check this value against the nameplate of the installed unit before ordering.
  • Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
  • Flame detection: UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) — Record it with the other nameplate data when sourcing a replacement.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 1507492

Q.Before ordering 1507492, which bus interface entry should be checked?

The bus interface entry quoted above is CANopen®/DeviceNet™. Confirm this figure against the unit currently in the panel.

Q.Where can I find the enclosure rating data for 1507492?

It is listed in the specification table for Phoenix Contact 1507492 as IP67 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.

Q.For 1507492, what does the specification table state about rated current Ie?

The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1507492. Check the revision of the installed unit if the catalog number has been superseded.

Q.Can the 1507492 replace the unit currently installed in my panel?

Compare catalog number 1507492 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Q.What should I include in an enquiry for 1507492?

Send the full catalog number 1507492, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1507492.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!