Phoenix Contact · contactor
1032926 is a Phoenix Contact contactor with Enclosure rating IP20 (IEC 60529); Mounting 35 mm DIN rail (IEC 60715); Operating temperature -25...+60 °C (IEC 60068-2-1). It is used in motor starters, pump control panels, HVAC contactor banks where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Tripping characteristic |
8 mm |
| Frequency |
25 Hz |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Mechanical |
| Weight |
514 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact contactor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact contactor variants |
| Catalog number |
Mounting |
|
1032926 (this page) |
35 mm DIN rail (IEC 60715) |
| 1032921 |
35 mm DIN rail (IEC 60715) |
| 1032927 |
35 mm DIN rail (IEC 60715) |
| 1032919 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1032926 is the device-level element in a Phoenix Contact contactor installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in motor starters, pump control panels, HVAC contactor banks, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1032926
Phoenix Contact 1032926 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1032926; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Frequency: 25 Hz — Verify it in the project documentation before confirming the order.
- Tripping characteristic: 8 mm — Check this value against the nameplate of the installed unit before ordering.
- Terminal wire size: 0.5 mm² ... 2.5 mm² — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1032926
Q.For 1032926, what does the specification table state about rated insulation voltage Ui?
The specification table lists rated insulation voltage Ui = 690 V (IEC 60947-4-1) for Phoenix Contact 1032926. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under tripping characteristic for catalog number 1032926?
For 1032926, tripping characteristic is given as 8 mm. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1032926, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1032926 before ordering?
Match the catalog number 1032926 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1032926 replace the unit currently installed in my panel?
Compare catalog number 1032926 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.