Phoenix Contact · contactor
1032921 is a Phoenix Contact contactor with Enclosure rating IP20 (IEC 60529); Mounting 35 mm DIN rail (IEC 60715); Operating temperature -25...+60 °C (IEC 60068-2-1). It is used in motor starters, pump control panels, HVAC contactor banks where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Tripping characteristic |
8 mm |
| Frequency |
25 Hz |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Mechanical |
| Weight |
264 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact contactor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact contactor variants |
| Catalog number |
Mounting |
|
1032921 (this page) |
35 mm DIN rail (IEC 60715) |
| 1032926 |
35 mm DIN rail (IEC 60715) |
| 1032927 |
35 mm DIN rail (IEC 60715) |
| 1032919 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1032921 is the device-level element in a Phoenix Contact contactor installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in motor starters, pump control panels, HVAC contactor banks, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1032921
Phoenix Contact 1032921 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1032921; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Frequency: 25 Hz — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 0.5 Nm ... 0.6 Nm — Verify it in the project documentation before confirming the order.
- Weight: 264 g — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1032921
Q.Which value is published under weight for catalog number 1032921?
For 1032921, weight is given as 264 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1032921, which frequency entry should be checked?
The frequency entry quoted above is 25 Hz. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the mounting data for 1032921?
It is listed in the specification table for Phoenix Contact 1032921 as 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1032921 replace the unit currently installed in my panel?
Compare catalog number 1032921 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1032921?
Send the full catalog number 1032921, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1032921.