Phoenix Contact · sensor
0903044 is a Phoenix Contact sensor with Sensing distance Sn 7430000 h (at 25 °C with 80 % load); Enclosure rating IP20 (IEC 60529); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in conveyor object detection, machine guarding, position feedback where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Sensing distance Sn7430000 h (at 25 °C with 80 % load)
-
Enclosure ratingIP20 (IEC 60529)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Input voltage range |
max. 32 V DC |
| Output current |
max. 0.2 A (Short-circuit-proof) |
| Rated torque |
... 1.2 Nm |
| I/O and communication |
| Sensing distance Sn |
7430000 h (at 25 °C with 80 % load) |
| Mechanical |
| Weight |
68.1 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 16 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact sensor variants |
| Catalog number |
Sensing distance Sn |
|
0903044 (this page) |
7430000 h (at 25 °C with 80 % load) |
| 0903023 |
7430000 h (at 25 °C with 80 % load) |
| 0903025 |
7430000 h (at 25 °C with 80 % load) |
| 0903026 |
7430000 h (at 25 °C with 80 % load) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0903044 is the device-level element in a Phoenix Contact sensor installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in conveyor object detection, machine guarding, position feedback, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0903044
Phoenix Contact 0903044 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0903044; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Breaking capacity Icu/Ics: 6 kA / 10 kA (EN 60934 / UL 1077) — Match it to the existing panel and upstream protection.
- Tripping characteristic: B / C / D (EN 60934 / UL 1077) — Record it with the other nameplate data when sourcing a replacement.
- Rated impulse withstand Uimp: 4 kV (IEC 60947-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Number of poles: 1 / 2 / 3 / 4 (EN 60934 / UL 1077) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 0903044
Q.Which value is published under number of poles for catalog number 0903044?
For 0903044, number of poles is given as 1 / 2 / 3 / 4 (EN 60934 / UL 1077). Confirm this figure against the unit currently in the panel.
Q.Before ordering 0903044, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the tripping characteristic data for 0903044?
It is listed in the specification table for Phoenix Contact 0903044 as B / C / D (EN 60934 / UL 1077). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 0903044 replace the unit currently installed in my panel?
Compare catalog number 0903044 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 0903044?
Send the full catalog number 0903044, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0903044.