Phoenix Contact · sensor
0903035 is a Phoenix Contact sensor with Sensing distance Sn 7430000 h (at 25 °C with 80 % load); Supply voltage 24 V DC (IEC 60934); Enclosure rating IP20 (IEC 60529). It is used in conveyor object detection, machine guarding, position feedback where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Sensing distance Sn7430000 h (at 25 °C with 80 % load)
-
Supply voltage24 V DC (IEC 60934)
-
Enclosure ratingIP20 (IEC 60529)
-
Rated current Ie4 A (IEC 60934)
Specifications
| Electrical |
| Rated current Ie |
4 A (IEC 60934) |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Auxiliary contacts |
1 N/C signal contact |
| Supply voltage |
24 V DC (IEC 60934) |
| Rated torque |
... 1.2 Nm |
| I/O and communication |
| Sensing distance Sn |
7430000 h (at 25 °C with 80 % load) |
| Mechanical |
| Weight |
69.366 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 16 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact sensor variants |
| Catalog number |
Sensing distance Sn |
|
0903035 (this page) |
7430000 h (at 25 °C with 80 % load) |
| 0903030 |
7430000 h (at 25 °C with 80 % load) |
| 0903023 |
7430000 h (at 25 °C with 80 % load) |
| 0903025 |
7430000 h (at 25 °C with 80 % load) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0903035 is the device-level element in a Phoenix Contact sensor installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60934) — and switches or conditions the load within the 4 A (IEC 60934) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in conveyor object detection, machine guarding, position feedback, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0903035
Phoenix Contact 0903035 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0903035; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated torque: ... 1.2 Nm — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+60 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Auxiliary contacts: 1 N/C signal contact — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 0903035
Q.For 0903035, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+60 °C (IEC 60068-2-1) for Phoenix Contact 0903035. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under humidity for catalog number 0903035?
For 0903035, humidity is given as 96 h, 95 % RH, 40 °C. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 0903035, which auxiliary contacts entry should be checked?
The auxiliary contacts entry quoted above is 1 N/C signal contact. Confirm this figure against the unit currently in the panel.
Q.Can the 0903035 replace the unit currently installed in my panel?
Compare catalog number 0903035 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 0903035?
Send the full catalog number 0903035, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0903035.