Phoenix Contact · Connection Cable
2867649 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
0.3 GHz ... 6 GHz |
| Mechanical |
| Weight |
600 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
Mounting |
|
2867649 (this page) |
up to 4 A |
— |
| 2867225 |
up to 4 A |
DIN rail / panel |
| 2867377 |
up to 4 A |
DIN rail / panel |
| 2860374 |
up to 4 A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2867649 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2867649
Phoenix Contact 2867649 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2867649; record the nameplate data of the unit being replaced before selecting an equivalent.
- Frequency: 0.3 GHz ... 6 GHz — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.
- Weight: 600 g — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2867649
Q.Before ordering 2867649, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+80 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the weight data for 2867649?
It is listed in the specification table for Phoenix Contact 2867649 as 600 g. Confirm this figure against the unit currently in the panel.
Q.For 2867649, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 2867649. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2867649?
Send the full catalog number 2867649, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2867649.
Q.How do I confirm compatibility of 2867649 before ordering?
Match the catalog number 2867649 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.