Phoenix Contact 2761499 SUBCON 9/F-SH - D-SUB bus connector

SKU: 2761499
Regular price $23.98
In stock (100 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

2761499 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)
  • CertificationsCE, UL, cULus

Specifications

Electrical
Rated current Ie up to 4 A
Tripping characteristic 5 mm
Rated torque 0.22 Nm ... 0.25 Nm
Mechanical
Weight 44 g
Terminal type 26
Terminal wire size 0.14 mm²
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 10 % ... 95 % (non-condensing)

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Rated current Ie
2761499 (this page) up to 4 A
2761295 up to 4 A
2761509 up to 4 A
2761596 up to 4 A

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2761499 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2761499

Phoenix Contact 2761499 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2761499; verify the catalog number against your bill of materials before requesting a quotation.

  • Tripping characteristic: 5 mm — Confirm the revision of the installed unit before a like-for-like replacement.
  • Weight: 44 g — Use it as the reference when cross-checking a current-production equivalent.
  • Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
  • Rated current Ie: up to 4 A — Check this value against the nameplate of the installed unit before ordering.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 2761499

Q.Where can I find the rated current Ie data for 2761499?

It is listed in the specification table for Phoenix Contact 2761499 as up to 4 A. Compare it with the nameplate of the installed unit before ordering.

Q.For 2761499, what does the specification table state about certifications?

The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2761499. Confirm this figure against the unit currently in the panel.

Q.Which value is published under operating temperature for catalog number 2761499?

For 2761499, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.

Q.What should I include in an enquiry for 2761499?

Send the full catalog number 2761499, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2761499.

Q.How do I confirm compatibility of 2761499 before ordering?

Match the catalog number 2761499 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!