Phoenix Contact · Connection Cable
2744089 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
5 mm |
| Rated torque |
0.22 Nm ... 0.25 Nm |
| I/O and communication |
| Bus interface |
CAN, KEBA |
| Mechanical |
| Weight |
58.26 g |
| Terminal type |
26 |
| Terminal wire size |
0.14 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2744089 (this page) |
up to 4 A |
| 2744018 |
up to 4 A |
| 2744102 |
up to 4 A |
| 2744241 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2744089 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2744089
Phoenix Contact 2744089 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2744089; record the nameplate data of the unit being replaced before selecting an equivalent.
- Humidity: 10 % ... 95 % (non-condensing) — Match it to the existing panel and upstream protection.
- Tripping characteristic: 5 mm — Record it with the other nameplate data when sourcing a replacement.
- Terminal type: 26 — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 58.26 g — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2744089
Q.For 2744089, what does the specification table state about humidity?
The specification table lists humidity = 10 % ... 95 % (non-condensing) for Phoenix Contact 2744089. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated current Ie for catalog number 2744089?
For 2744089, rated current Ie is given as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2744089, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2744089 before ordering?
Match the catalog number 2744089 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2744089?
Send the full catalog number 2744089, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2744089.