Phoenix Contact · Front Adapter
2322731 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
63 V |
| Tripping characteristic |
10 mm |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
940 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Front Adapter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Front Adapter variants |
| Catalog number |
Mounting |
|
2322731 (this page) |
DIN rail / panel |
| 2322728 |
DIN rail / panel |
| 2322456 |
DIN rail / panel |
| 2322618 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2322731 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2322731
Phoenix Contact 2322731 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2322731; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Terminal wire size: 0.2 mm² ... 2.5 mm² — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Flame detection: IEC 60332-1-2 (raw cable) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2322731
Q.Where can I find the degree of protection data for 2322731?
It is listed in the specification table for Phoenix Contact 2322731 as ≥ IP54 (Installation location). Use the value as the reference when sourcing a current-production equivalent.
Q.For 2322731, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 2322731. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under flame detection for catalog number 2322731?
For 2322731, flame detection is given as IEC 60332-1-2 (raw cable). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2322731?
Send the full catalog number 2322731, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2322731.
Q.How do I confirm compatibility of 2322731 before ordering?
Match the catalog number 2322731 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.