Phoenix Contact · Front Adapter
2322618 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
63 V |
| Tripping characteristic |
10 mm |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
1,472.6 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Front Adapter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Front Adapter variants |
| Catalog number |
Mounting |
|
2322618 (this page) |
DIN rail / panel |
| 2322650 |
DIN rail / panel |
| 2322456 |
DIN rail / panel |
| 2322728 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2322618 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2322618
Phoenix Contact 2322618 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2322618; record the nameplate data of the unit being replaced before selecting an equivalent.
- Terminal wire size: 0.2 mm² ... 2.5 mm² — Use it as the reference when cross-checking a current-production equivalent.
- Tripping characteristic: 10 mm — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2322618
Q.Which value is published under certifications for catalog number 2322618?
For 2322618, certifications is given as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2322618, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the mounting data for 2322618?
It is listed in the specification table for Phoenix Contact 2322618 as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2322618?
Send the full catalog number 2322618, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2322618.
Q.How do I confirm compatibility of 2322618 before ordering?
Match the catalog number 2322618 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.