Phoenix Contact · Front Adapter
2322650 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
63 V |
| Tripping characteristic |
10 mm |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
2,722.6 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Front Adapter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Front Adapter variants |
| Catalog number |
Mounting |
|
2322650 (this page) |
DIN rail / panel |
| 2322618 |
DIN rail / panel |
| 2322456 |
DIN rail / panel |
| 2322728 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2322650 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2322650
Phoenix Contact 2322650 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2322650; record the nameplate data of the unit being replaced before selecting an equivalent.
- Weight: 2,722.6 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Flame detection: IEC 60332-1-2 (raw cable) — Use it as the reference when cross-checking a current-production equivalent.
- Terminal wire size: 0.2 mm² ... 2.5 mm² — Verify it in the project documentation before confirming the order.
- Tripping characteristic: 10 mm — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2322650
Q.For 2322650, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2322650. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under tripping characteristic for catalog number 2322650?
For 2322650, tripping characteristic is given as 10 mm. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2322650, which rated insulation voltage Ui entry should be checked?
The rated insulation voltage Ui entry quoted above is 63 V. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 2322650 before ordering?
Match the catalog number 2322650 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2322650?
Send the full catalog number 2322650, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2322650.