Phoenix Contact · Connection Cable
2289104 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
404 g |
| Terminal wire size |
Round cable set |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2289104 (this page) |
up to 4 A |
| 2289117 |
up to 4 A |
| 2289010 |
up to 4 A |
| 2289036 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2289104 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2289104
Phoenix Contact 2289104 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2289104; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal wire size: Round cable set — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2289104
Q.Before ordering 2289104, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the operating temperature data for 2289104?
It is listed in the specification table for Phoenix Contact 2289104 as -25...+80 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.For 2289104, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = Round cable set for Phoenix Contact 2289104. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2289104?
Send the full catalog number 2289104, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2289104.
Q.How do I confirm compatibility of 2289104 before ordering?
Match the catalog number 2289104 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.