Phoenix Contact · Connection Cable
2288927 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
97.033 g |
| Terminal wire size |
Round cable set |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2288927 (this page) |
up to 4 A |
| 2288901 |
up to 4 A |
| 2288914 |
up to 4 A |
| 2288956 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2288927 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2288927
Phoenix Contact 2288927 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2288927; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Flame detection: IEC 60332-1-2 (raw cable) — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2288927
Q.Where can I find the rated current Ie data for 2288927?
It is listed in the specification table for Phoenix Contact 2288927 as up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2288927, what does the specification table state about flame detection?
The specification table lists flame detection = IEC 60332-1-2 (raw cable) for Phoenix Contact 2288927. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under degree of protection for catalog number 2288927?
For 2288927, degree of protection is given as ≥ IP54 (Installation location). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2288927 before ordering?
Match the catalog number 2288927 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2288927 replace the unit currently installed in my panel?
Compare catalog number 2288927 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.