Phoenix Contact · Terminal Block
2970578 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
8 mm |
| Mechanical |
| Weight |
335.7 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Mounting |
Rated current Ie |
Rated operational voltage |
|
2970578 (this page) |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 2970565 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 2970057 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 2970154 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2970578 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2970578
Phoenix Contact 2970578 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2970578; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2970578
Q.Where can I find the tripping characteristic data for 2970578?
It is listed in the specification table for Phoenix Contact 2970578 as 8 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.For 2970578, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 2970578. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated current Ie for catalog number 2970578?
For 2970578, rated current Ie is given as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.Can the 2970578 replace the unit currently installed in my panel?
Compare catalog number 2970578 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2970578 before ordering?
Match the catalog number 2970578 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.