Phoenix Contact 2970057 Terminal Block

SKU: 2970057
Regular price $250.00
In stock (89 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

2970057 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP00. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Enclosure ratingIP00
  • Operating temperature-20 °C ... 50 °C

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 125 V
Tripping characteristic 8 mm
Mechanical
Weight 312 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 4 mm²
Enclosure rating IP00
Environment and compliance
Operating temperature -20 °C ... 50 °C
Certifications CE, UL, cULus
Degree of protection ≥ IP54 (Installation location)

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Rated current Ie Rated operational voltage Mounting
2970057 (this page) up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2970154 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2970196 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2970565 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2970057 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2970057

Phoenix Contact 2970057 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2970057; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Rated operational voltage: 800 V (IEC 60947-7-1) — Record it with the other nameplate data when sourcing a replacement.
  • Rated insulation voltage Ui: 125 V — Confirm the revision of the installed unit before a like-for-like replacement.
  • Mounting: 35 mm DIN rail (IEC 60715) — Use it as the reference when cross-checking a current-production equivalent.
  • Enclosure rating: IP00 — Verify it in the project documentation before confirming the order.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 2970057

Q.Where can I find the tripping characteristic data for 2970057?

It is listed in the specification table for Phoenix Contact 2970057 as 8 mm. Check the revision of the installed unit if the catalog number has been superseded.

Q.For 2970057, what does the specification table state about rated operational voltage?

The specification table lists rated operational voltage = 800 V (IEC 60947-7-1) for Phoenix Contact 2970057. Compare it with the nameplate of the installed unit before ordering.

Q.Which value is published under rated current Ie for catalog number 2970057?

For 2970057, rated current Ie is given as up to 41 A (IEC 60947-7-1). Confirm this figure against the unit currently in the panel.

Q.How do I confirm compatibility of 2970057 before ordering?

Match the catalog number 2970057 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.What should I include in an enquiry for 2970057?

Send the full catalog number 2970057, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2970057.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!