Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Terminal Block
2700965 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 8 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | up to 41 A (IEC 60947-7-1) |
|---|---|
| Rated operational voltage | 800 V (IEC 60947-7-1) |
| Breaking capacity Icu/Ics | Two line conductors confused I/O error message |
| Tripping characteristic | 8 mm |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Frequency | 20 Hz ... 100 Hz |
| Overload capacity | 1.4 times continuous; 150 A for 10 ms |
| Rated speed | 500 kbps |
| I/O and communication | |
| Bus interface | 28 Byte |
| Mechanical | |
| Dimensions (H x W x D) | Housing dimensions |
| Weight | 231.2 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 0.2 mm² ... 1.5 mm² |
| Environment and compliance | |
| Operating temperature | -25 °C ... 55 °C |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Terminal Block variants | |||
| Catalog number | Breaking capacity Icu/Ics | Tripping characteristic | Rated operational voltage |
|---|---|---|---|
| 2700965 (this page) | Two line conductors confused I/O error message | 8 mm | 800 V (IEC 60947-7-1) |
| 2700974 | no | — | 800 V (IEC 60947-7-1) |
| 2700976 | no | — | 800 V (IEC 60947-7-1) |
| 2700988 | no | 8 mm | 800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2700965 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 7.5 V DC (via voltage jumper) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2700965 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2700965; verify the catalog number against your bill of materials before requesting a quotation.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Which value is published under rated current Ie for catalog number 2700965?
For 2700965, rated current Ie is given as up to 41 A (IEC 60947-7-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2700965, which bus interface entry should be checked?
The bus interface entry quoted above is 28 Byte. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the humidity data for 2700965?
It is listed in the specification table for Phoenix Contact 2700965 as 10 % ... 95 % (non-condensing). Confirm this figure against the unit currently in the panel.
Q.Can the 2700965 replace the unit currently installed in my panel?
Compare catalog number 2700965 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2700965?
Send the full catalog number 2700965, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2700965.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
