Phoenix Contact 2970196 Terminal Block

SKU: 2970196
Regular price $350.03
In stock (99 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

2970196 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -20 °C ... 50 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Operating temperature-20 °C ... 50 °C
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 300 V
Tripping characteristic 7 mm
Mechanical
Weight 266.2 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 2.5 mm²
Environment and compliance
Operating temperature -20 °C ... 50 °C
Certifications CE, UL, cULus

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Rated current Ie Rated operational voltage Mounting
2970196 (this page) up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2970154 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2970057 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2970565 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2970196 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2970196

Phoenix Contact 2970196 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2970196; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.

  • Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
  • Tripping characteristic: 7 mm — Check this value against the nameplate of the installed unit before ordering.
  • Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
  • Rated operational voltage: 800 V (IEC 60947-7-1) — Record it with the other nameplate data when sourcing a replacement.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 2970196

Q.For 2970196, what does the specification table state about rated operational voltage?

The specification table lists rated operational voltage = 800 V (IEC 60947-7-1) for Phoenix Contact 2970196. Compare it with the nameplate of the installed unit before ordering.

Q.Which value is published under weight for catalog number 2970196?

For 2970196, weight is given as 266.2 g. Confirm this figure against the unit currently in the panel.

Q.Before ordering 2970196, which terminal wire size entry should be checked?

The terminal wire size entry quoted above is 0.2 mm² ... 2.5 mm². Use the value as the reference when sourcing a current-production equivalent.

Q.What should I include in an enquiry for 2970196?

Send the full catalog number 2970196, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2970196.

Q.How do I confirm compatibility of 2970196 before ordering?

Match the catalog number 2970196 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!