Phoenix Contact · Terminal Block
2970154 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -20 °C ... 50 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Operating temperature-20 °C ... 50 °C
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
125 V |
| Tripping characteristic |
8 mm |
| Mechanical |
| Weight |
297.8 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Environment and compliance |
| Operating temperature |
-20 °C ... 50 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
2970154 (this page) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
35 mm DIN rail (IEC 60715) |
| 2970196 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
35 mm DIN rail (IEC 60715) |
| 2970057 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
35 mm DIN rail (IEC 60715) |
| 2970565 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2970154 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2970154
Phoenix Contact 2970154 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2970154; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Operating temperature: -20 °C ... 50 °C — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0.2 mm² ... 4 mm² — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2970154
Q.For 2970154, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Phoenix Contact 2970154. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under operating temperature for catalog number 2970154?
For 2970154, operating temperature is given as -20 °C ... 50 °C. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2970154, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 41 A (IEC 60947-7-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2970154 replace the unit currently installed in my panel?
Compare catalog number 2970154 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2970154 before ordering?
Match the catalog number 2970154 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.