Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Switch Disconnector
2924265 is a Phoenix Contact industrial component with Supply voltage 24 V DC -20 % ... +25 %; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 440 V (IEC 60947-2) |
|---|---|
| Rated impulse withstand Uimp | 4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics | 6 kA / 10 kA (IEC 60947-3) |
| Tripping characteristic | B / C / D (IEC 60947-3) |
| Number of poles | 1 / 2 / 3 / 4 (IEC 60947-3) |
| Supply voltage | 24 V DC -20 % ... +25 % |
| Power consumption | < 950 mW |
| Frequency | ≤ 20 Hz (without load) |
| Mechanical | |
| Weight | 163.2 g |
| Mounting | DIN rail / panel |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Phoenix Contact Switch Disconnector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Switch Disconnector variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 2924265 (this page) | DIN rail / panel | ||
| 2924087 | DIN rail / panel | ||
| 2902035 | 35 mm DIN rail (IEC 60715) | ||
| 2906164 | 35 mm DIN rail (IEC 60715) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2924265 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC -20 % ... +25 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2924265 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2924265; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Before ordering 2924265, which number of poles entry should be checked?
The number of poles entry quoted above is 1 / 2 / 3 / 4 (IEC 60947-3). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the certifications data for 2924265?
It is listed in the specification table for Phoenix Contact 2924265 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For 2924265, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = B / C / D (IEC 60947-3) for Phoenix Contact 2924265. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2924265 before ordering?
Match the catalog number 2924265 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2924265 replace the unit currently installed in my panel?
Compare catalog number 2924265 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
