Phoenix Contact · Surge Protection
2908307 is a Phoenix Contact circuit breaker with Tripping characteristic 8 mm; Breaking capacity Icu/Ics up to 63rd harmonic; Supply voltage 100 V AC ... 230 V AC (±20 %). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic8 mm
-
Breaking capacity Icu/Icsup to 63rd harmonic
-
Supply voltage100 V AC ... 230 V AC (±20 %)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
up to 63rd harmonic |
| Tripping characteristic |
8 mm |
| Supply voltage |
100 V AC ... 230 V AC (±20 %) |
| Input voltage range |
18 V AC ... 690 V AC (Phase/Phase) |
| Power consumption |
≤ 4 W |
| Frequency |
50 Hz ... 60 Hz (AC sine) |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Rated speed |
10 Mbps |
| I/O and communication |
| Response time |
5 A |
| Mechanical |
| Weight |
305 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 6 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
≤ 95 % (non-condensing) |
Values follow the Phoenix Contact Surge Protection specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Surge Protection variants |
| Catalog number |
Tripping characteristic |
|
2908307 (this page) |
8 mm |
| 2908366 |
C |
| 2908576 |
— |
| 2908581 |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2908307 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 100 V AC ... 230 V AC (±20 %) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2908307
Phoenix Contact 2908307 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2908307; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated torque: 0.5 Nm ... 0.6 Nm — Use it as the reference when cross-checking a current-production equivalent.
- Rated speed: 10 Mbps — Verify it in the project documentation before confirming the order.
- Frequency: 50 Hz ... 60 Hz (AC sine) — Check this value against the nameplate of the installed unit before ordering.
- Response time: 5 A — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2908307
Q.Where can I find the power consumption data for 2908307?
It is listed in the specification table for Phoenix Contact 2908307 as ≤ 4 W. Confirm this figure against the unit currently in the panel.
Q.For 2908307, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 2908307. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under input voltage range for catalog number 2908307?
For 2908307, input voltage range is given as 18 V AC ... 690 V AC (Phase/Phase). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 2908307 before ordering?
Match the catalog number 2908307 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2908307 replace the unit currently installed in my panel?
Compare catalog number 2908307 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.