Phoenix Contact · Surge Protection
2818643 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Surge Protection specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Surge Protection variants |
| Catalog number |
Mounting |
|
2818643 (this page) |
DIN rail / panel |
| 2839208 |
DIN rail / panel |
| 2878117 |
DIN rail / panel |
| 2702258 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2818643 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2818643
Phoenix Contact 2818643 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 2818643; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2818643
Q.For 2818643, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2818643. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under mounting for catalog number 2818643?
For 2818643, mounting is given as DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2818643, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2818643?
Send the full catalog number 2818643, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2818643.
Q.Can the 2818643 replace the unit currently installed in my panel?
Compare catalog number 2818643 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.