Phoenix Contact 1833027 Connection Cable

SKU: 1833027
Regular price $282.16
In stock (69 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

1833027 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Tripping characteristic 7 mm; Rated operational voltage 160 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Tripping characteristic7 mm
  • Rated operational voltage160 V
  • Breaking capacity Icu/IcsTin-plated

Specifications

Electrical
Rated current Ie up to 4 A
Rated operational voltage 160 V
Rated insulation voltage Ui 160 V
Rated impulse withstand Uimp 2.95 kV
Breaking capacity Icu/Ics Tin-plated
Tripping characteristic 7 mm
Frequency 1.39 kV
Rated torque 0.3 Nm
Rated speed 1 octave/min
Mechanical
Weight 3.4 g
Mounting Threaded flange
Terminal type Tin (5 µm - 7 µm Sn)
Terminal wire size 0 °
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 30 % ... 70 %

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Breaking capacity Icu/Ics Rated operational voltage
1833027 (this page) Tin-plated 160 V
1000042 — 48 V AC
1027669 — —
1080745 CAT6A —

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1833027 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 160 V — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides Threaded flange support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1833027

Phoenix Contact 1833027 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1833027; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

  • Rated insulation voltage Ui: 160 V — Use it as the reference when cross-checking a current-production equivalent.
  • Rated impulse withstand Uimp: 2.95 kV — Verify it in the project documentation before confirming the order.
  • Terminal wire size: 0 ° — Check this value against the nameplate of the installed unit before ordering.
  • Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 1833027

Q.Where can I find the humidity data for 1833027?

It is listed in the specification table for Phoenix Contact 1833027 as 30 % ... 70 %. Confirm this figure against the unit currently in the panel.

Q.For 1833027, what does the specification table state about rated torque?

The specification table lists rated torque = 0.3 Nm for Phoenix Contact 1833027. Use the value as the reference when sourcing a current-production equivalent.

Q.Which value is published under rated speed for catalog number 1833027?

For 1833027, rated speed is given as 1 octave/min. Check the revision of the installed unit if the catalog number has been superseded.

Q.What should I include in an enquiry for 1833027?

Send the full catalog number 1833027, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1833027.

Q.Can the 1833027 replace the unit currently installed in my panel?

Compare catalog number 1833027 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!