Phoenix Contact · Heavy-Duty Connector
1771765 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
387.69 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
1771765 (this page) |
— |
— |
DIN rail / panel |
| 1771723 |
16 A |
<= 440 V AC |
DIN rail / panel |
| 1771749 |
16 A |
<= 440 V AC |
DIN rail / panel |
| 1771118 |
— |
— |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1771765 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1771765
Phoenix Contact 1771765 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1771765; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Weight: 387.69 g — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1771765
Q.Where can I find the certifications data for 1771765?
It is listed in the specification table for Phoenix Contact 1771765 as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1771765, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1771765. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under enclosure rating for catalog number 1771765?
For 1771765, enclosure rating is given as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1771765 before ordering?
Match the catalog number 1771765 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1771765 replace the unit currently installed in my panel?
Compare catalog number 1771765 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.