Phoenix Contact · Connection Cable
1703784 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Tripping characteristic 12 mm; Rated operational voltage 1000 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Tripping characteristic12 mm
-
Rated operational voltage1000 V
-
Breaking capacity Icu/IcsElectroplated silver
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
1000 V |
| Rated insulation voltage Ui |
1000 V |
| Breaking capacity Icu/Ics |
Electroplated silver |
| Tripping characteristic |
12 mm |
| Rated torque |
1.7 Nm ... 1.8 Nm |
| Mechanical |
| Weight |
42.5 g |
| Mounting |
Screw flange |
| Terminal type |
Tin (4 µm - 8 µm Sn) |
| Terminal wire size |
0 ° |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1703784 (this page) |
Electroplated silver |
1000 V |
| 1000042 |
— |
48 V AC |
| 1027669 |
— |
— |
| 1080745 |
CAT6A |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1703784 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 1000 V — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides Screw flange support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1703784
Phoenix Contact 1703784 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1703784; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Humidity: 30 % ... 70 % — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated torque: 1.7 Nm ... 1.8 Nm — Use it as the reference when cross-checking a current-production equivalent.
- Terminal type: Tin (4 µm - 8 µm Sn) — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1703784
Q.Which value is published under rated torque for catalog number 1703784?
For 1703784, rated torque is given as 1.7 Nm ... 1.8 Nm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1703784, which breaking capacity Icu/Ics entry should be checked?
The breaking capacity Icu/Ics entry quoted above is Electroplated silver. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the rated current Ie data for 1703784?
It is listed in the specification table for Phoenix Contact 1703784 as up to 4 A. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1703784 before ordering?
Match the catalog number 1703784 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1703784 replace the unit currently installed in my panel?
Compare catalog number 1703784 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.