Phoenix Contact · Patch Panel
1656411 is a Phoenix Contact circuit breaker with Rated current Ie 1 A; Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics CAT5 (IEC 11801:2002). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie1 A
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsCAT5 (IEC 11801:2002)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
1 A |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
CAT5 (IEC 11801:2002) |
| Mechanical |
| Weight |
312 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Patch Panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Patch Panel variants |
| Catalog number |
Mounting |
|
1656411 (this page) |
DIN rail / panel |
| 1656987 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1656411 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 1 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1656411
Phoenix Contact 1656411 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1656411; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated current Ie: 1 A — Verify it in the project documentation before confirming the order.
- Rated operational voltage: <= 440 V AC — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Breaking capacity Icu/Ics: CAT5 (IEC 11801:2002) — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1656411
Q.For 1656411, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 1656411. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated operational voltage for catalog number 1656411?
For 1656411, rated operational voltage is given as <= 440 V AC. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1656411, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1656411?
Send the full catalog number 1656411, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1656411.
Q.How do I confirm compatibility of 1656411 before ordering?
Match the catalog number 1656411 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.