Phoenix Contact · Surge Protection (PLUGTRAB / VALVETRAB)
1249054 is a Phoenix Contact circuit breaker with Rated current Ie 16 A (at 63 °C); Breaking capacity Icu/Ics 6 kA AC; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A (at 63 °C)
-
Breaking capacity Icu/Ics6 kA AC
-
Enclosure ratingIP20 (IEC 60529)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
16 A (at 63 °C) |
| Breaking capacity Icu/Ics |
6 kA AC |
| Power consumption |
≤ 2.7 mVA (at UREF) |
| Frequency |
50 Hz (60 Hz) |
| Rated torque |
0.5 Nm |
| I/O and communication |
| Response time |
≤ 25 ns |
| Mechanical |
| Weight |
95.14 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % |
Values follow the Phoenix Contact Surge Protection (PLUGTRAB / VALVETRAB) specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 1249054 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 16 A (at 63 °C) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1249054
Phoenix Contact 1249054 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1249054; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated torque: 0.5 Nm — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: 16 A (at 63 °C) — Confirm the revision of the installed unit before a like-for-like replacement.
- Response time: ≤ 25 ns — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1249054
Q.Which value is published under response time for catalog number 1249054?
For 1249054, response time is given as ≤ 25 ns. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1249054, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the breaking capacity Icu/Ics data for 1249054?
It is listed in the specification table for Phoenix Contact 1249054 as 6 kA AC. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1249054 before ordering?
Match the catalog number 1249054 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1249054?
Send the full catalog number 1249054, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1249054.