Phoenix Contact · Hand Tool
1212207 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
215 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Hand Tool specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Hand Tool variants |
| Catalog number |
Mounting |
|
1212207 (this page) |
DIN rail / panel |
| 1212124 |
DIN rail / panel |
| 1212150 |
DIN rail / panel |
| 1212151 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1212207 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1212207
Phoenix Contact 1212207 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1212207; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Weight: 215 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1212207
Q.For 1212207, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1212207. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under weight for catalog number 1212207?
For 1212207, weight is given as 215 g. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1212207, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Can the 1212207 replace the unit currently installed in my panel?
Compare catalog number 1212207 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1212207?
Send the full catalog number 1212207, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1212207.