Phoenix Contact · Heavy-Duty Connector
1771613 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated torque |
1.5 Nm ... 2 Nm (Mounting screw) |
| Mechanical |
| Weight |
155.88 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Cutout dimensions |
35 mm |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Mounting |
|
1771613 (this page) |
DIN rail / panel |
| 1771642 |
DIN rail / panel |
| 1771684 |
DIN rail / panel |
| 1771118 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1771613 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1771613
Phoenix Contact 1771613 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1771613; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 1.5 Nm ... 2 Nm (Mounting screw) — Verify it in the project documentation before confirming the order.
- Weight: 155.88 g — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1771613
Q.Where can I find the rated torque data for 1771613?
It is listed in the specification table for Phoenix Contact 1771613 as 1.5 Nm ... 2 Nm (Mounting screw). Confirm this figure against the unit currently in the panel.
Q.For 1771613, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1771613. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under weight for catalog number 1771613?
For 1771613, weight is given as 155.88 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1771613 before ordering?
Match the catalog number 1771613 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1771613 replace the unit currently installed in my panel?
Compare catalog number 1771613 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.