Phoenix Contact · Hand Tool
1212124 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
224 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Hand Tool specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Hand Tool variants |
| Catalog number |
Mounting |
|
1212124 (this page) |
DIN rail / panel |
| 1212150 |
DIN rail / panel |
| 1212151 |
DIN rail / panel |
| 1212156 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1212124 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1212124
Phoenix Contact 1212124 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1212124; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 224 g — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1212124
Q.Which value is published under mounting for catalog number 1212124?
For 1212124, mounting is given as DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1212124, which weight entry should be checked?
The weight entry quoted above is 224 g. Confirm this figure against the unit currently in the panel.
Q.Where can I find the operating temperature data for 1212124?
It is listed in the specification table for Phoenix Contact 1212124 as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1212124?
Send the full catalog number 1212124, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1212124.
Q.How do I confirm compatibility of 1212124 before ordering?
Match the catalog number 1212124 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.