Phoenix Contact · Power Distributor
1197405 is a Phoenix Contact circuit breaker with Rated current Ie 4 A; Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics Supply voltage per module Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie4 A
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsSupply voltage per module Green LED
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
4 A |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
Supply voltage per module Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.2 Nm |
| Mechanical |
| Weight |
82 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1197405 (this page) |
— |
Supply voltage per module Green LED |
<= 440 V AC |
| 1197328 |
— |
Supply voltage Green LED |
— |
| 1175449 |
8 mm |
Supply voltage per module Green LED |
— |
| 1047491 |
8 mm ... 10 mm |
— |
500 V |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1197405 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1197405
Phoenix Contact 1197405 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1197405; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Rated current Ie: 4 A — Check this value against the nameplate of the installed unit before ordering.
- Breaking capacity Icu/Ics: Supply voltage per module Green LED — Match it to the existing panel and upstream protection.
- Rated operational voltage: <= 440 V AC — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1197405
Q.For 1197405, what does the specification table state about input voltage range?
The specification table lists input voltage range = 85...264 V AC / 110...300 V DC (IEC 61010) for Phoenix Contact 1197405. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under enclosure rating for catalog number 1197405?
For 1197405, enclosure rating is given as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Before ordering 1197405, which rated torque entry should be checked?
The rated torque entry quoted above is 0.2 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1197405 before ordering?
Match the catalog number 1197405 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1197405 replace the unit currently installed in my panel?
Compare catalog number 1197405 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.