Phoenix Contact · Power Distributor
1197328 is a Phoenix Contact circuit breaker with Rated current Ie 6 A; Breaking capacity Icu/Ics Supply voltage Green LED; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie6 A
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
6 A |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.2 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
111.1 kg/km |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1197328 (this page) |
— |
Supply voltage Green LED |
— |
| 1197405 |
— |
Supply voltage per module Green LED |
<= 440 V AC |
| 1175449 |
8 mm |
Supply voltage per module Green LED |
— |
| 1047491 |
8 mm ... 10 mm |
— |
500 V |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1197328 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 6 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1197328
Phoenix Contact 1197328 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1197328; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated current Ie: 6 A — Record it with the other nameplate data when sourcing a replacement.
- Breaking capacity Icu/Ics: Supply voltage Green LED — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1197328
Q.Where can I find the flame detection data for 1197328?
It is listed in the specification table for Phoenix Contact 1197328 as DIN EN 50265. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1197328, what does the specification table state about weight?
The specification table lists weight = 111.1 kg/km for Phoenix Contact 1197328. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under terminal wire size for catalog number 1197328?
For 1197328, terminal wire size is given as 19x 0.15 mm. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1197328?
Send the full catalog number 1197328, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1197328.
Q.How do I confirm compatibility of 1197328 before ordering?
Match the catalog number 1197328 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.