Phoenix Contact · Power Distributor
1047491 is a Phoenix Contact circuit breaker with Rated current Ie 17.5 A; Tripping characteristic 8 mm ... 10 mm; Rated operational voltage 500 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie17.5 A
-
Tripping characteristic8 mm ... 10 mm
-
Rated operational voltage500 V
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
17.5 A |
| Rated operational voltage |
500 V |
| Tripping characteristic |
8 mm ... 10 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Frequency |
f1= 5 Hz to f2= 250 Hz |
| Rated speed |
10 rpm |
| Mechanical |
| Weight |
0.2 mm² / 0.2 kg |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1047491 (this page) |
8 mm ... 10 mm |
— |
500 V |
| 1175449 |
8 mm |
Supply voltage per module Green LED |
— |
| 1197328 |
— |
Supply voltage Green LED |
— |
| 1197405 |
— |
Supply voltage per module Green LED |
<= 440 V AC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1047491 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 500 V — and switches or conditions the load within the 17.5 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1047491
Phoenix Contact 1047491 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1047491; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated speed: 10 rpm — Check this value against the nameplate of the installed unit before ordering.
- Efficiency: up to 94 % — Match it to the existing panel and upstream protection.
- Frequency: f1= 5 Hz to f2= 250 Hz — Record it with the other nameplate data when sourcing a replacement.
- Weight: 0.2 mm² / 0.2 kg — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1047491
Q.Before ordering 1047491, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 8 mm ... 10 mm. Confirm this figure against the unit currently in the panel.
Q.Where can I find the rated speed data for 1047491?
It is listed in the specification table for Phoenix Contact 1047491 as 10 rpm. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1047491, what does the specification table state about frequency?
The specification table lists frequency = f1= 5 Hz to f2= 250 Hz for Phoenix Contact 1047491. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1047491 replace the unit currently installed in my panel?
Compare catalog number 1047491 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1047491?
Send the full catalog number 1047491, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1047491.