Phoenix Contact · Power Distributor
1175449 is a Phoenix Contact circuit breaker with Rated current Ie 10 A; Tripping characteristic 8 mm; Breaking capacity Icu/Ics Supply voltage per module Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Tripping characteristic8 mm
-
Breaking capacity Icu/IcsSupply voltage per module Green LED
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Breaking capacity Icu/Ics |
Supply voltage per module Green LED |
| Tripping characteristic |
8 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.35 Nm |
| Mechanical |
| Weight |
386.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 0.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1175449 (this page) |
8 mm |
Supply voltage per module Green LED |
— |
| 1197328 |
— |
Supply voltage Green LED |
— |
| 1197405 |
— |
Supply voltage per module Green LED |
<= 440 V AC |
| 1047491 |
8 mm ... 10 mm |
— |
500 V |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1175449 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1175449
Phoenix Contact 1175449 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1175449; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Breaking capacity Icu/Ics: Supply voltage per module Green LED — Match it to the existing panel and upstream protection.
- Rated torque: 0.35 Nm — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 0.14 mm² ... 0.5 mm² — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: -25...+70 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1175449
Q.Before ordering 1175449, which weight entry should be checked?
The weight entry quoted above is 386.4 g. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the tripping characteristic data for 1175449?
It is listed in the specification table for Phoenix Contact 1175449 as 8 mm. Confirm this figure against the unit currently in the panel.
Q.For 1175449, what does the specification table state about rated torque?
The specification table lists rated torque = 0.35 Nm for Phoenix Contact 1175449. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1175449 replace the unit currently installed in my panel?
Compare catalog number 1175449 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1175449?
Send the full catalog number 1175449, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1175449.