Phoenix Contact · Timer Relay
1119399 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1); Mounting 35 mm DIN rail (IEC 60715). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Tripping characteristic |
10 mm |
| Input voltage range |
24 V AC/DC ... 240 V AC/DC (-15 % ... +10 %) |
| Power consumption |
2.5 VA (0.8 W) |
| Frequency |
48 Hz ... 63 Hz |
| I/O and communication |
| Response time |
no |
| Mechanical |
| Weight |
179.3 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Timer Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Timer Relay variants |
| Catalog number |
Mounting |
|
1119399 (this page) |
35 mm DIN rail (IEC 60715) |
| 1096429 |
35 mm DIN rail (IEC 60715) |
| 2307293 |
35 mm DIN rail (IEC 60715) |
| 2866187 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1119399 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1119399
Phoenix Contact 1119399 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1119399; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Humidity: 10 % ... 95 % (non-condensing) — Confirm the revision of the installed unit before a like-for-like replacement.
- Input voltage range: 24 V AC/DC ... 240 V AC/DC (-15 % ... +10 %) — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1119399
Q.Where can I find the frequency data for 1119399?
It is listed in the specification table for Phoenix Contact 1119399 as 48 Hz ... 63 Hz. Confirm this figure against the unit currently in the panel.
Q.For 1119399, what does the specification table state about humidity?
The specification table lists humidity = 10 % ... 95 % (non-condensing) for Phoenix Contact 1119399. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under response time for catalog number 1119399?
For 1119399, response time is given as no. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1119399?
Send the full catalog number 1119399, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1119399.
Q.Can the 1119399 replace the unit currently installed in my panel?
Compare catalog number 1119399 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.