Phoenix Contact · Relay Module
2307293 – PLC-RSC- 24DC/PMC T200/21HC · Relay Module
The Phoenix Contact 2307293 (PLC-RSC- 24DC/PMC T200/21HC) is a Relay Module in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 11 sections: Product properties, Electrical properties, Input data, Output data, Connection data, Dimensions and further sections.
Nominal voltage24 VÂ DC
Degree of protectionIP20
Ambient temperature-20 °C ... 50 °C
Dimensions14 mm
ConnectionScrew connection
Materialgreen (RAL 6021)
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Product properties, Electrical properties, Input data, Output data, Connection data, Dimensions, Material specifications, Environmental and real-life conditions, Approvals, Standards and regulations, Mounting. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Product properties
Product typeRelay Module
Product familyPLC-INTERFACE
Operating mode100% operating factor
Mechanical service lifeapprox. 2x 10 7 cycles
Insulation characteristics: Air clearances and creepage distances
InsulationSafe isolation, reinforced insulation (divider plate PLC-ATP should be installed for safe isolation between adjacent modules).
Overvoltage categoryIII
Pollution degree3
Data management status
Date of last data management07.05.2026
Electrical properties
Maximum power dissipation for nominal condition0.4 W
Input data
Coil side
Nominal input voltage U N24 VÂ DC
Input voltage range19.2 V DC ... 26.4 V DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)24 VÂ DC
Typical input current at U N15 mA (Relay ON)
Value4.3 mA (Relay OFF)
Typical response time7 ms
Typical release time200 ms +130Â ms (Typical interval time at U N )
Protective circuitSurge protection; Freewheeling diode
Operating voltage displayYellow LED
Output data
Switching
Contact switching typeSingle contact, 1 changeover contact
Type of switch contactSingle contact
Contact materialAgNi, hard gold-plated
Maximum switching voltage250 V AC/DC (Divider plate PLC-ATP must be installed for voltages larger than 250Â V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Minimum switching voltage12 V AC/DC
Limiting continuous current10 A
Maximum inrush current16 A
Min. switching current100 mA
Switching: when the gold layer is destroyed
Interrupting rating (ohmic load) max.240 W (at 24Â VÂ DC)
Value144 W (at 48 V DC)
Value48 W (at 60 V DC)
Value50 W (at 110Â V DC)
Value80 W (at 220 V DC)
Value4000 W (for 250Â VÂ AC)
Connection data
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross-section rigid0.14 mm² ... 2.5 mm²
Conductor cross-section flexible0.14 mm² ... 2.5 mm²
Value0.2 mm² ... 2.5 mm² (Single ferrule)
Value2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG26 ... 14
Tightening torque0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Dimensions
Item dimensions
Width14 mm
Height80 mm
Depth94 mm
Material specifications
Colorgreen (RAL 6021)
Flammability rating according to UL 94 (Housing)V0 (Housing)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 50 °C
Approvals
Corrosive gas test
IdentificationISA-S71.04. G3 Harsh Group
ValueENÂ 60068-2-60
Standards and regulations
Air clearances and creepage distances
Standards/regulationsDINÂ ENÂ 50178
Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany
Order number
2307293 — https://www.phoenixcontact.com/en-us/products/timer-relay-plc-rsc-24dc-pmc-t200-21hc-2307293
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2307293.
FAQ
What voltage does the 2307293 operate at?
Phoenix Contact gives a nominal voltage of 24 VÂ DC for this order number.
What degree of protection does the 2307293 have?
It is rated IP20, as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of -20 °C ... 50 °C.
What are the dimensions?
The technical data gives 14 mm.
How is the 2307293 connected?
Phoenix Contact specifies the connection as Screw connection.
What material is the housing made of?
The technical data lists green (RAL 6021).
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.