Phoenix Contact · Timer Relay
1096429 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1); Mounting 35 mm DIN rail (IEC 60715). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Tripping characteristic |
10 mm |
| Input voltage range |
24 V AC/DC ... 240 V AC/DC (-15 % ... +10 %) |
| Power consumption |
2.5 VA (0.8 W) |
| Frequency |
48 Hz ... 63 Hz |
| Rated torque |
0.5 Nm ... 0.6 Nm (5 lb in ... 7 lb in) |
| I/O and communication |
| Response time |
yes |
| Mechanical |
| Weight |
182 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Timer Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Timer Relay variants |
| Catalog number |
Mounting |
|
1096429 (this page) |
35 mm DIN rail (IEC 60715) |
| 1119399 |
35 mm DIN rail (IEC 60715) |
| 2307293 |
35 mm DIN rail (IEC 60715) |
| 2866187 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1096429 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1096429
Phoenix Contact 1096429 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1096429; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Frequency: 48 Hz ... 63 Hz — Use it as the reference when cross-checking a current-production equivalent.
- Response time: yes — Verify it in the project documentation before confirming the order.
- Rated torque: 0.5 Nm ... 0.6 Nm (5 lb in ... 7 lb in) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1096429
Q.Which value is published under operating temperature for catalog number 1096429?
For 1096429, operating temperature is given as -25...+60 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1096429, which input voltage range entry should be checked?
The input voltage range entry quoted above is 24 V AC/DC ... 240 V AC/DC (-15 % ... +10 %). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the rated insulation voltage Ui data for 1096429?
It is listed in the specification table for Phoenix Contact 1096429 as 690 V (IEC 60947-4-1). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1096429 before ordering?
Match the catalog number 1096429 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1096429 replace the unit currently installed in my panel?
Compare catalog number 1096429 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.