Phoenix Contact · Relay Module
2950064 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Tripping characteristic |
8 mm |
| Mechanical |
| Weight |
44.95 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Relay Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Relay Module variants |
| Catalog number |
Mounting |
|
2950064 (this page) |
DIN rail / panel |
| 2950048 |
DIN rail / panel |
| 2950077 |
DIN rail / panel |
| 2950103 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2950064 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2950064
Phoenix Contact 2950064 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2950064; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Rated impulse withstand Uimp: 6 kV (IEC 60947-4-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Tripping characteristic: 8 mm — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2950064
Q.For 2950064, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0.2 mm² ... 4 mm² for Phoenix Contact 2950064. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated impulse withstand Uimp for catalog number 2950064?
For 2950064, rated impulse withstand Uimp is given as 6 kV (IEC 60947-4-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2950064, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Can the 2950064 replace the unit currently installed in my panel?
Compare catalog number 2950064 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2950064?
Send the full catalog number 2950064, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2950064.